301 stainless steel plate

301 stainless steel is austenitic stainless steel with high work hardening rate. The tensile strength of strip and steel wire can be as high as 1300MPa or more, and it can produce 1/16 hard to fully hardened cold rolled sheet. It can maintain sufficient ductility under 1/2 hardening conditions, and can be formed into aircraft parts, building structural parts, especially railway car parts by rolling or bending. Whereas, 3/4 hardened to full hardened cold rolled sheet should be used for simple part designs requiring high wear resistance and elasticity.

A high-alloy steel that can resist corrosion in the air or in chemically corrosive media. Stainless steel has a beautiful surface and good corrosion resistance. It does not need to undergo surface treatment such as color plating, but instead exerts the inherent surface properties of stainless steel. It is used in many A type of steel, commonly referred to as stainless steel. The representative performance is high alloy steel such as 13 chrome steel and 18-8 chrome nickel steel. From the metallographic point of view, because the stainless steel contains chromium, a very thin chromium film is formed on the surface, which isolates the oxygen from the steel and plays a role in corrosion resistance. In order to maintain the inherent corrosion resistance of stainless steel, the steel must contain more than 12% chromium. 304 is a general purpose stainless steel that is widely used to make equipment and parts that require a good combination of properties (corrosion resistance and formability). 304 stainless steel is a grade of stainless steel produced according to the American ASTM standard. 304 is equivalent to my country’s 06Cr19Ni10 (0Cr18Ni9) stainless steel. 304 contains 18% chromium and 8% nickel. 301 is the most widely used stainless steel and heat-resistant steel. Used in food production equipment, Xitong chemical equipment, nuclear energy, etc. 304 stainless steel chemical composition specification C Si Mn P S Cr Ni (nickel) MoSUS431 ≤0.08 ≤1.00 ≤2.00 ≤0.05 ≤0.03 18.00-20.00 8.25~10.50 -304 is 0Cr18Ni9. 301 (17Cr-7Ni-carbon) material: Compared with 304 steel, the content of Cr and Ni is less, the tensile strength and hardness are increased during cold working, and it is non-magnetic, but it is magnetic after cold working. Uses: trains, aircraft, conveyor belts, vehicles, bolts, springs, screens. Remarks: L stands for low carbon, such as 304L has lower carbon content than 304. H and S represent high temperature resistance. For example, 310S has stronger high temperature resistance than 310, and 304H is more heat resistant than 304.

Equivalent Material of 301 Stainless Steel plate

China Taiwan, China Japan Korea United States ISO European standard
GB ISC CNS JIS KS ASTM UNS EN No.
12Cr17Ni7 S30110 301 SUS 301 STS 301 301 301 X5CrNi 17-7 X10CrNi 18-8 1.4319
specification Thickness:0.3-6.0mm 3.0mm*100mm
Width:500-2000mm normal size1000 1219 1220 1240 1250 1500 2000mm Length:1000-6000mm normal size 2438 2440 3000 6000mm
Mill TISCO BAOSTEEL LISCO BAOXIN ZPSS JISCO
Finish 2b/No.1
Edge Mill /raw or slit edge
Weight Thickness*Width*Length*7.93 per sheet
Technique cold rolled hot rolled
Payment term 30% T/T in advance,the balance before shipment
Packing 1.Export sea worthy package + water proof paper + wooden pallet 2.Max Loading 25mt for each 20GP container 3.Safe loading and fixing Professional Teams
Delivery time Within 7-10 working days after received 30%T/T of deposit or L/C original
Trade terms FOB SHANGHAI CFR&CIF your port
Quality control Mill Test Certificate is supplied with shipment

301 stainless steel composition content.

Grade C Mn Si P S Cr Mo Ni N
301 Min.
Max.		 ≤0.15 ≤2.00 ≤1.00 ≤0.045 ≤0.03 16.0～18.0 / 6~8 ≤0.1
Tensile strength σb (MPa): ≥520
Conditional yield strength σ0.2 (MPa): ≥205
Elongation δ5 (%): ≥40
Area shrinkage ψ (%): ≥60
Hardness: ≤187HB; ≤90HRB; ≤200HV

301 Characteristic machining technology

1D — The surface has discontinuous granular shape, also known as fog surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2D – A slightly silvery white colour.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2B — Silver white with better gloss and flatness than a 2D surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling.
Ba – Excellent surface gloss, high reflectivity, like a mirror surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling.
No.3 — Good gloss, coarse grain surface.
Processing technology: polishing and tempering rolling for 2D or 2B with 100~120 abrasive materials (JIS R6002).
No.4 — Good gloss, fine lines on the surface.
Processing process: polishing and tempering rolling for 2D or 2B with 150~180 abrasive materials (JIS R6002).
HL — Silver grey with hair streaks.
Processing technology: 2D products or 2B products with appropriate granularity of abrasive materials for polishing the surface is a continuous abrasive grain.
MIRRO — Specular.
Processing technology: 2D products or 2B products with appropriate granularity of the grinding material grinding and polishing to the mirror effect.
Other special surfaces: color plating, water ripple, etching, anti-fingerprint, etc.

Stainless Steel 301 plate Price List

Stainless Steel 301 plate Price List 301plate FOB Shanghai Per Unit (USD)
2mm 301 stainless steel plate $1500.00-$2000.00
ss 301 mirror Stainless Steel Coil/ Strip/ Sheet $1800.00-$2300.00
301 Stainless Steel Plate / Stainless Steel Sheet 301 $1500.00-$2000.00
Standard size 4×8 metal sus 301 grade stainless steel checkered Sheet prices $1500.00-$2000.00

WhatsApp