316Ti Stainless Steel Coil

316Ti Stainless steel coil Price in China ,Manufacturer of 316Ti Stainless Steel coil

316Ti stainless steel coil national standard 0Cr18Ni12Mo2Ti Chinese brand is 1Cr18Ni12Mo2Ti stainless steel coil, 316Ti stainless steel coil is added in SUS316 steel Ti to improve the intergranular corrosion resistance.
Used to resist sulfuric acid, phosphoric acid, acetic acid, acetic acid equipment.

These attributes refer to products in similar, but not identical, attributes that are specified for other products, such as coils and forgings in their respective specifications.
Lower minimum pre and post thermal temperatures reduce the incidence of welds, cracking and simplify welding.
Low hardness decreases in the heat affected zone to minimize deterioration in the mold performance.

Standard Specification Of 316Ti coil

316Ti stainless steel composition content.

YS (MPa) ≥205
TS (MPa) ≥520
EL (%) ≥40
Hv around 200 °
Thickness: cold 2B board (0.09-6.0mm);
Hot rolled industrial coil No.1(3-50mm) medium thick coil, chemical coil, high temperature coil;
Width: 5mm– 850mm steel belt;
1000, 1219, 1250, 1500, 1800, 2000mm coil, flat coil
Surface: 2B smooth surface, No.1 industrial surface, BA (6K) mirror, 8K mirror, 9K mirror, drawing surface, frosted surface.
Origin: domestic, imported (Sweden, Japan, Finland, South Korea, South Africa, Taiwan)

316Ti Characteristic machining technology

1D — The surface has discontinuous granular shape, also known as fog surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2D – A slightly silvery white colour.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
2B — Silver white with better gloss and flatness than a 2D surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + quenching and tempering rolling.
Ba – Excellent surface gloss, high reflectivity, like a mirror surface.
Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenching and tempering rolling.
No.3 — Good gloss, coarse grain surface.
Processing technology: polishing and tempering rolling for 2D or 2B with 100~120 abrasive materials (JIS R6002).
No.4 — Good gloss, fine lines on the surface.
Processing process: polishing and tempering rolling for 2D or 2B with 150~180 abrasive materials (JIS R6002).
HL — Silver grey with hair streaks.
Processing technology: 2D products or 2B products with appropriate granularity of abrasive materials for polishing the surface is a continuous abrasive grain.
MIRRO — Specular.
Processing technology: 2D products or 2B products with appropriate granularity of the grinding material grinding and polishing to the mirror effect.