NM400 Carbon Steel Coil

M400 Carbon Steel Coil Features

Is poured with molten steel, cooled and pressed into flat steel.
It is flat, rectangular and can be rolled directly or cut from a wide strip of steel.
According to the thickness of steel Coil, thin steel Coil <4 mm (the thinnest 0.2 mm), medium thick steel Coil 4~60 mm, extra thick steel Coil 60~115 mm.
The steel Coil is rolled into hot rolling and cold rolling.
The width of the sheet is 500~1500 mm; The length of the sheet is 600~3000 mm. Thin Coils are classified by steel types, including ordinary steel, high quality steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, silicon steel and industrial pure iron sheet, etc. According to the professional use, there are oil drum with board, enamel with board, bulletproof with board, etc. According to the surface coating points, there are galvanized sheet, tin Coil, lead Coil, plastic composite steel Coil.

Specification of NM400 Carbon Steel Coil

Processing Technology Of NM400 Carbon Steel Coil

With the development of science and technology and industry, the materials put forward higher requirements, such as higher strength, resistance to high temperature, high pressure, low temperature, corrosion resistance, wear and other special physical and chemical properties of the requirements, carbon steel has been unable to fully meet the requirements.

Deficiency of carbon steel:
(1) Low hardenability. In general, the maximum quenching diameter of carbon steel water quenching is only 10mm-20mm.

(2) Relatively low strength and buckling. For example, the σ S of ordinary carbon steel Q235 steel is 235MPa, while the σ S of low alloy structural steel 16Mn is more than 360MPa. The σ S /σ B of 40 steel is only 0.43, which is much lower than that of alloy steel.

(3) Poor tempering stability. Because of the poor tempering stability, carbon steel in the quenching and tempering treatment, in order to ensure higher strength to use a lower tempering temperature, so that the toughness of steel is low; In order to ensure better toughness, the strength of high tempering temperature is low, so the comprehensive mechanical properties of carbon steel is not high.

(4) Can not meet the requirements of special performance. Carbon steel in oxidation resistance, corrosion resistance, heat resistance, low temperature resistance, wear resistance and special electromagnetic and other aspects are often poor, can not meet the needs of special performance.

Price Range Of NM400 Steel Coil

＄600-＄3000